Published August 31st, 2022 by Allen Campbell
The Quictent 10’x 20’ is a versatile and easy-to-assemble shelter that can be used for a variety of purposes, from picnics and camping trips to backyard parties and barbecues. The assembly process is straightforward and can be completed in a matter of minutes with just a few simple steps.
Following these instructions will make it much easier. Make sure to read through the entire guide before beginning to ensure you have all the materials and tools you need. It may be useful to print out the instructions so you can have them for reference as you complete the task.
#12 Base Plates
NOTE: For your safety and comfort, this tent was packed in one box. Before setup, please check that all pieces have arrived. But if you find any parts damaged or missing, please feel free to contact the company so they can be sent out to you as soon as possible!
Now, I assume you have all the parts listed above. Start by using POLE #3 and #4 & connectors #11 and #13 in order to assemble the upper frame.
Now you need to attach the upper frame to the roof with POLE #1,#2,#3 & #7 along with connector 10. Afterward, take POLE #5 and insert it into the outlets on connector #11.
Now you’ll need to grab the cover and put it snugly over the frame. Make sure that the base plates #12 are at the bottom for stability and remaining legs poles #6 are in their designated holes.
In this step, you will pull the leg cover tight so it won’t blow off during strong winds or when you’re sleeping in the tent. To do this, first, attach metal hooks near the feet to tube holes.
Next, you will need to use stakes and guy lines to keep the tension going without putting too much weight onto them by making the angle too steep. I recommend using 45-degree stakes for this process. If you follow these procedures, you’ll be able to assure yourself that your shelter will fit properly.
After you have the cover on, you are now able to set up the side panels. To do this, simply roll them out and place them on the end with plastic rings and buckles. If you want to remove it separately, that is also possible.
It’s important to properly store your Quictent tent to ensure that it will be in good condition for the next season. Although it may be tempting to simply leave your tent set up in the yard, this can actually lead to damage from weather and pests. Instead, follow these simple tips for storing your tent:
First, make sure that your tent is clean and dry before you put it away. Any dirt or moisture that is left on the fabric can attract mold and mildew. Be sure to let your tent dry completely before packing it up.
Find a place to store your tent that is away from any heat or moisture. An attic or closet is ideal. Avoid storing your tent in a damp basement or garage, as this can cause the fabric to mildew.
Finally, invest in a good storage bag. A heavy-duty storage bag will protect your tent from dust and dirt while it’s being stored. Make sure to label the bag with the name of the contents and the date so that you can easily find it when you’re ready to camp again.
With these easy tips, you can help to prolong the life of your Quictent tent and enjoy many seasons of happy camping.
Fortunately, there are a few easy ways to fix common canopy problems. If your canopy is sagging, you can try tacking it up with some heavy-duty string or wire.
For holes, patches, or tears, a little bit of fabric glue should do the trick. Just be sure to select a glue that is compatible with the fabric of your canopy. When in doubt, always seek the advice of a professional.
There are a few different methods to repair a bent canopy. Tension rods are one option. Tension rods are available at most hardware stores and can be used to effectively straighten out a bent leg canopy.
Another way to fix a bent leg canopy is to use zip ties. Zip ties are also available at most hardware stores and can be used to temporarily straighten out a bent leg canopy.
One common method is to use guy rope. These are cables that are attached to the corners or sides of the canopy and then anchored into the ground. The rope can assist to keep the structure from falling over in heavy winds.
Another option is to use weights, such as sandbags, to hold down the legs of the canopy. This is often done in conjunction with guy wires for additional stability.
This was a fairly straightforward build, in my opinion. I would recommend having two people do it – one to hold the parts and one to actually put them together. It took me about an hour to put it all together, but that could definitely be cut down if you have help. The finished product is absolutely stunning and really adds a touch of elegance to any outdoor event. Have you tried out Quictent’s products before? What did you think?
Allen is a full time writer at Mastercanopies.com and enjoys traveling around the United States and exploring nature. He enjoys writing about canopies as he believes they are extremely crucial in having a successful camping trip whether it be a trip to the beach, mountains, or the open plains.
Are Canopies Allowed on Fort Myers Beach, Florida? Published July 29th, 2022 by Allen Campbell If you’re considering visiting Fort Myers Beach, Florida, you may
Are Canopies Allowed on Virginia Beach, VA? Beach Rules & Regulations Published July 29th, 2022 by Allen Campbell Virginia Beach has numerous beaches that are
Are Canopies Allowed on Cherry Grove Beach, SC? Beach Rules & Regulations Published July 27th, 2022 by Allen Campbell Are canopies allowed on Cherry Grove
Alvantor Beach Tent Review: Should You Get This Beach Tent? Published June 4th, 2022 by Allen Campbell Are you thinking of buying an Alvantor Beach
Master Canopies is here to bring you the best canopies for the outdoors so that you can enjoy the fresh air without the gleaming and burning light of the sun.